Objectives
India's utility-scale storage build-out relies extensively on imported Lithium-ion cells, leaving critical gaps in indigenous cell chemistry, large-format cell design, cell-to-pack manufacturing and safety validation for grid-scale and Indian ambient conditions. Laboratory approaches on alternative chemistries, including sodium-ion, redox-flow, zinc- and iron-based systems, essentially remain confined to low TRL (2 to 4), with limited large-format cell fabrication, degradation/lifetime validation or pilot-scale manufacturing demonstrations that industry can reliably scale. The persistent gap between bench-scale material engineering and commercially deployable, grid-certified technology poses strategic vulnerabilities for India in terms of structurally exposed costs, critical-mineral supply-chain dependency and energy security despite the renewable energy (RE) penetration and battery energy storage system (BESS) deployment accelerating toward the 2030 and 2047 targets.
The renewable capacity of India is expanding more rapidly than the systems built to forecast it. The Ministry of New and Renewable Energy (MNRE), Government of India, is targeting roughly 500 GW of non-fossil fuel capacity by 2030, with installed solar and wind energy capacity already surpassing ~226 GW. The variable, weather-dependent nature of RE poses challenges for grid balancing, frequency regulation and system stability. Utility-scale Energy Storage Systems particularly Solar + BESS are therefore essential for RE firming and reliable, secure integration of high RE levels.
However, persistent errors in forecasting day-ahead renewable energy generation create operational and financial challenges, with deviations between scheduled and actual energy generation directly causing financial liabilities/penalties under the Deviation Settlement Mechanism (DSM).
The challenge of forecasting is further intensified by rising variable renewable energy (VRE) penetration and flexible demand (including AI data-centre loads projected to add 26.3 GW by 2031-32). Roughly 8,133 GWh of solar curtailment was recorded in April-June 2026 alone, with unreliable forecasting a significant contributor. India has already established dedicated operational infrastructure, including ~11 Renewable Energy Management Centres (REMCs) co-located with SLDCs, RLDCs and the NLDC. However, generation scheduling, storage dispatch and curtailment response remain predominantly rule-based or reactive, due to their dependence on a single-point forecast that is rarely updated and explicitly does not carry any information on the forecast uncertainty.
The Mission for Advancement in High-impact Areas (MAHA) of the Anusandhan National Research Foundation (ANRF) supports priority-centric, solution-oriented research in mission mode, with an emphasis on multidisciplinary collaboration, technological advancement and translation of research into impactful national outcomes. In this context, MAHA Renewable Energy (MAHA-RE) Programme is being launched by ANRF in collaboration with MNRE (Ministry of New and Renewable Energy) in order to address this gap through a mission-mode approach, time-bound, outcome-linked and structured around measurable TRL milestones, spanning both indigenous battery storage technology and AI-based renewable energy forecasting.
Vision
To establish India as a self-reliant, globally competitive hub for the design, development and manufacture of indigenous non-lithium batteries purpose-built for utility-scale energy storage and RE firming, and to pair them with accurate, uncertainty-aware AI-based forecasting, so that variable renewable generation can be scheduled and integrated into the grid with confidence, securing India's energy transition against import dependence and critical-mineral supply-chain risk.
Programme Structure
Program is organised under two tracks
.
Objectives
Track A: Battery Storage Objectives: Objectives are organised to follow the technology-maturation pathway
Proposal Scope
Track A Scope:
Non-lithium and emerging electrochemical energy storage technologies at or above TRL 3+, with credible potential to complement, diversify or substitute lithium-ion-based systems for stationery and utility-scale applications. Proposals shall demonstrate clear relevance to grid-scale energy storage and should address one or more aspects of cell chemistry, cell architecture, larger-format cell development, materials, components, electrolytes, manufacturing processes, system configuration, safety, performance, scalability and lifecycle management.
The scope is not restricted to any specific cell chemistry, cell format or technology configuration. Technologies enabling larger-format cells, higher energy/power density, improved cycle life, enhanced safety, reduced dependence on critical or imported materials, improved manufacturability and lower lifecycle cost are particularly encouraged.
Priority technology families include, but are not limited to:
Applicants may propose other emerging chemistries, cell formats, architectures, materials, components or technology configurations, modelling & simulation for utility scale BESS not specifically listed above, provided that a clear, evidence-based case is established for their utility-scale relevance, technology maturity, safety, scalability, techno-economic viability and potential for an India-specific raw-material, manufacturing, supply-chain or strategic advantage.
Measurable Target Outcomes / KPIs
The proposal must target following KPI, more details are enclosed in Annexure A
Track A KPIs
| KPI | Description |
|---|---|
| 1 | TRL achieved at project completion, benchmarked against TRL at proposal submission |
| 2 | Safety performance qualification (abuse-testing, thermal-runaway criteria, fault/anomaly response time) |
| 3 | Cycle life / calendar life and degradation rate |
| 4 | Round-trip efficiency (RTE) under representative grid-scale conditions |
| 5 | Cell/module capacity, energy density and power density |
| 6 | Percentage of indigenous/domestic content across materials, components and manufacturing |
| 7 | Cost trajectory toward Li-ion baseline competitiveness (₹/kWh or % of benchmark) |
| 8 | Manufacturing yield and pilot-scale capacity (MWh/year) |
| 9 | BMS voltage/current range and diagnostic response time |
| 10 | Validation under representative grid operating conditions |
Nature and Extent of Support (Track A and Track B):
Total budget outlay will be ₹ 400 crore for five years.
General Guidelines:
Licensing Terms:
The programme will mandate the use of ANRF Open License frameworks, as outlined below:
All contributors must operate under these licensing models. Detailed information on the licenses is available here (adapted from the MIT License). In case of industry cost sharing - 12 months exclusive IP policy to the industry.
[Note: Failing to fulfil eligibility criteria and/or mandatory requirements at any stage as per general guidelines will lead to administrative rejection of the proposal.]
Within the hub-and-spoke consortium, proposals desirable to include the following in the capacity Honorary PI, as applicable.
Start-ups, MSMEs, Industry will not receive grant-in-aid funding under this program. However, industry, MSMEs, start-ups can be compensated:
Track A:
Each supported Track A project proposal must demonstrate following:
Stage 1: Pre-Proposal
Must Include
Stage 2: Full Proposal (Only by invitation):
Pre-Proposal
Full Proposal
Evaluation Criteria include but not limited to:
Submission Mode
General Conditions
Documents Required
Q1: Who can apply under the MAHA RE Program?
A1: The proposal can be submitted by Lead Principal Investigator (LPI) holding a regular position in an academic institution or a National Research Laboratory (NRL). The LPI can also be from recognised not-for-profit Research Institutions/Section 8 companies whose objects clause aligns with the program goals. The LPI should have at least four (4) years of service remaining at the date of proposal submission.
Q2: Can private institutions and industries participate?
A2: Yes. Private academic or R&D institutions with valid UGC/AICTE/DSIR recognition may participate as co-PI. Industry partners are desirable and must provide a minimum of 10% in-cash contribution and a clear translational research plan.
Q3: Can a PI submit a proposal individually?
A3: No, leading PI has to submit a proposal in collaboration with other PIs and other Institutions.
Q4: Who can serve as a Co-PI in a consortium proposal?
A4: Faculty/scientists from eligible institutions with relevant expertise/complementary expertise can serve as Co-PIs.
Q5: What is the eligibility of Co-PI?
A5: The Co-PI must hold a regular position in an Indian academic institution or national research laboratory, with a Ph.D. in Science, Mathematics, Engineering.
Q6: Can a PI submit more than one proposal under the same call?
A6: A researcher can submit not more than one proposal as either PI or co-PI.
Q7: Are ad-hoc, contractual, or temporary faculty eligible to apply?
A7: Yes, ad-hoc, contractual or temporary faculty can apply in a project as honorary investigator or collaborator not as s Co-PI.
Q8: Can applicants without institutional affiliation apply?
A8: No. Applicant should be affiliated with a recognized institute/University.
Q9: Can multiple proposals be submitted from the same institution?
A9: Yes. Institutions can submit multiple proposals from different PIs.
Q10: Is there a limit on the number of Co-PIs in a consortium?
A10: Yes. Up to 5 Co-PIs are allowed.
Q11: Is an endorsement letter required for each PI / co-PI?
A11: Yes. While, there is no requirement of any documents during the pre-proposal submission stage, however institution endorsement/ certificate from the PI/Co-PI and other approval will be required during full proposal submission. The pre-proposal should be shortlisted for full proposal submission.
Q12: Can a PI change their host institution after submission?
A12: Not at pre-proposal stage. This is permitted only after formal approval of ANRF.
Q13: Can two PIs from the same institution submit separate proposals?
A13: Yes, if they are distinct and unrelated proposals.
Q14: Are autonomous institutes under central/state governments eligible?
A14: Yes, autonomous institutes are eligible to apply.
Q15: Are private universities eligible to apply as Lead PI?
A15: Yes, private university having UGC/AICTE-recognition can submit application as Lead PI.
Q16: Are R&D labs under ministries eligible to participate?
A16: Yes, they are eligible.
Q17: Can the LPI/PI have Nationality other than Indian?
A17: Yes, the applicants who are OCI/POI are eligible to participate in the program subject to fulfilment of the guidelines as mentioned in ANRF OM No. ANRF/OM/N-01/2024 dated 01.10.2024.
Q18: Can an Industry/Academic institution from abroad (e.g. Foreign Industry) be as LPI/co-PI?
A18: No. Overseas industry is not eligible to participate. Foreign Academic institution may participate as Honorary PI, but no funding will be provided under this programme.
Q19: Are foreign nationals working in Indian institutions eligible to apply?
A19: Yes, if they hold full-time appointments and residence permits.
Q20: Can international collaboration be included?
A20: Yes, for technical or knowledge exchange purposes as collaborators / honorary investigators. However, the proposal shall not no ANRF funds will be remitted abroad.
Q21: What is the expected Technology Readiness Level (TRL)?
A21: The proposal having Technology Readiness Level of 3 or higher are eligible to apply. Projects should begin at TRL 3 or higher and aim to reach TRL 7 or higher by the end. Each proposal should include a TRL roadmap and a strategy for translation to deployable technology. For TRL level details, please refer to: https://www.psa.gov.in/national-technology-readiness
https://psa.gov.in/CMS/web/sites/default/files/publication/National%20Technology%20Readiness%20Assessment%20Framework_Final.pdf
Q22: What are the major deliverables expected?
A22: Deliverables are stated in the Call for Proposal document. The projects are expected to deliver:
Q23: What is the funding mechanism and duration?
A23: Individual project size is limited to INR 10 Crores with up to 90% funding provided by the programme and minimum 10% cost-sharing by the applicant consortium. Funds will be released by ANRF directly to the LPI, which will disburse to its Co-PI as per approved participation.
Q24: What costs are covered under the grant?
A24: The funding covers:
Q25: Is overhead cost (institute charges) permissible?
A25: The "Overhead" will be as per the ANRF-OM dated Oct 14, 2024. No budget provision for Capital for the proposals submitted by Co-PIs. In case of specific requirement, budget under capital may be considered and approved by the competent authority subject to the justification provided.
Q26: What is the submission process?
A26: Proposals must be submitted online only through the ANRF portal: www.anrfonline.in Submissions through any other mode will not be accepted.
Q27: Is the call structured as pre-proposal followed by full proposal?
A27: Yes, it is a two-stage process. First proposals will be evaluated and only shortlisted pre-proposal will be invited for full proposal submission.
Q28: What are the key documents required for submission?
A28:
Q29: Is a detailed budget required in the pre-proposal?
A29: No. Only a high-level budget summary is needed as per the Other Technical Details format during pre-proposal submission. However, the detailed budget with bifurcation to each participating institution should be submitted during full proposal submission.
Q30: Can applicants edit or revise the proposal after submission?
A30: No. Once submitted, it cannot be edited.
Q31: Is it mandatory to submit a pre-proposal by two or more institutions?
A31: Yes, through the consortium model.
Q32: Can the PI add or replace Co-PIs after submission?
A32: No, PI cannon add or replace co-PI after proposal submission.
Q33: Is it mandatory to submit a Gantt chart at the pre-proposal stage?
A33: Not mandatory but recommended.
Q34: How will proposals be evaluated?
A34: Proposals shall be evaluated by the Technical Program Committee (TPC) as per the criteria mentioned in the Call for Proposal. Some of the factors considered during evaluation are, but not limited to, the followings:
Q35: How will IP rights be managed?
A35: Intellectual Property generated will be governed by IP policy formulated by ANRF.
Q36: What are the priority research areas under this call?
A36: Refer to the Call for Proposal document.
Q37: Can a proposal be withdrawn after submission?
A37: Yes, with a written request through online portal.
Q38: Is it mandatory for all consortium partners to register on the portal?
A38: Yes. All participating institutions must register on the ANRF portal.
Q39: Can a PI change the thematic vertical after submission?
A39: No. Once the proposal is submitted, no changes are permitted.
Q40: Is plagiarism checked during proposal evaluation?
A40: Yes. High similarity index may lead to rejection.
Q41: How will project monitoring be carried out?
A41: Projects will be monitored by a TPC comprising representatives from ANRF, MNRE, and domain experts.Progress will be evaluated biannually against the approved milestones.
Q42: Can existing projects funded by DST/MNRE/ANRF be merged or extended?
A42: No. Only new proposals are eligible under this call. However, leveraging existing infrastructure, facilities, or data from ongoing projects are encouraged to strengthen proposals.
Q43: If I am interested in pursuing purely fundamental research and industry/non ANRF funding of 10% is not possible. Can I go ahead and still submit a proposal?
A43: No.
Q44: What is the exact role of PI?
A44: The LPI and PI will work towards successful execution of the project.
Q45: How many PIs can be associated in a project?
A45: The number of PIs depends on the requirement of specialization in terms of proposed objectives.
Q46: How will startups be part of the project?
A46: Startup can join as Co-PI. However, start-up will not be receipient of the grant.
Q47: Any possibility of funding availability for the startups?
A47: A Startup, can enter into contractual arrangement with Lead Institution for specific services relevant to the proposed research or for delivery of defined products, components, prototypes, validation services, or other measurable outcomes.
Q48: Is it permissible to have more than one industry partner?
A48: Yes.
Q49: Does the industry domain need to be same as the one in which the research is being proposed?
A49: Yes, preferably, but it is not mandatory.
Q50: Is a Letter of Intent (LoI) required from industry partners?
A50: Yes, at the time of submission of full proposal.
Q51: Are industry partners eligible for funding?
A51: The program does not entail funding to Industry Partners/Startups.
Q52: What documents are needed from industry?
A52: LoI/Support Letter/MoU at the time of submission of full proposal.
Q53: Can multiple industry partners be included?
A53: Yes.
Q54: Can industry provide datasets or infrastructure?
A54: Yes, this is encouraged.
Q55: What types of industries are eligible?
A55: Startups, MSMEs, large firms, and domain-relevant companies.
Q56: Can startups join a consortium?
A56: Yes. Startups can participate as collaborators/ Honorary investigators.
Q57: Can startups apply directly as PI?
A57: No. Only faculty/ scientists from academia / research labs can apply as PI/ Co-PI.
Q58: When to submit a full proposal?
A58: A full proposal should be submitted only if your pre-proposal is selected. Pre-proposals will undergo a preliminary screening to assess their alignment with the mission's scope and objectives, as well as their technical merit and potential impact. Only those pre-proposals that pass this evaluation will be invited to submit a full proposal.
Q59: Under what license must outputs be released?
A59: All outputs must be released under the ANRF Open License (adapted from MIT), ensuring open access, ethical use, and global interoperability.
Q60: Does ANRF have a Conflict of Interest (CoI) policy?
A60: Yes, ANRF strictly follows the CoI policy.
Q61: Can the PI add or replace co-PI at the time of full proposal submission?
A61: No, the PI cannot add or replace co-PI at the time of proposal submission unless advised by the selection committee.